Simulated propeller slipstream effects on a supercritical wing

To quantify the installed performance of high speed (M = 0.8) turboprop propulsion systems, an experimental program designed to assess the magnitude of the aerodynamic interference of a propeller slipstream on a supercritical wing has been conducted. The test was conducted in the NASA Ames 14-foot wind tunnel. An ejector-nacelle propeller slipstream simulator was used to produce a slipstream with characteristics typical of advanced propellers presently being investigated. A supercritical wing-body configuration was used to evaluate the interference effects. A traversing total pressure rake was used to make flow field measurements behind the wing and to calibrate the slipstream simulator. The force results indicated that the interference drag amounted to an increase of ten counts or about 3% of the wing-body drag for a two engine configuration at the nominal propeller operating conditions. However, at the higher swirl angles (11 deg vs. 7 deg nominally) the interference drag was favorable by about the same magnitude

Integrating case-based reasoning and hypermedia documentation: an application for the diagnosis of a welding robot at Odense steel shipyard

Reliable and effective maintenance support is a vital consideration for the management within today's manufacturing environment. This paper discusses the development of a maintenance system for the world's largest robot welding facility. The development system combines a case-based reasoning approach for diagnosis with context information, as electronic on-line manuals, linked using open hypermedia technology. The work discussed in this paper delivers not only a maintenance system for the robot stations under consideration, but also a design framework for developing maintenance systems for other similar applications

Expert Finding by Capturing Organisational Knowledge from Legacy Documents

Organisations capitalise on their best knowledge through the improvement of shared expertise which leads to a higher level of productivity and competency. The recognition of the need to foster the sharing of expertise has led to the development of expert finder systems that hold pointers to experts who posses specific knowledge in organisations. This paper discusses an approach to locating an expert through the application of information retrieval and analysis processes to an organization’s existing information resources, with specific reference to the engineering design domain. The approach taken was realised through an expert finder system framework. It enables the relationships of heterogeneous information sources with experts to be factored in modelling individuals’ expertise. These valuable relationships are typically ignored by existing expert finder systems, which only focus on how documents relate to their content. The developed framework also provides an architecture that can be easily adapted to different organisational environments. In addition, it also allows users to access the expertise recognition logic, giving them greater trust in the systems implemented using this framework. The framework were applied to real world application and evaluated within a major engineering company

Impact reactivity of materials at very high oxygen pressure

The requirements for impact testing of materials in an oxygen atmosphere at pressures from 82.7 MPa (12,000 psi) to 172 MPa (25,000 psi) were evaluated. The impact tester system was evaluated for potential pressure increases from 69 MPa (10,000 psi) to 82.7 MPa (12,000 psi). The low pressure oxygen and nitrogen systems, the impact tower, the impact test cell, and the high pressure oxygen system were evaluated individually. Although the structural integrity of the impact test cell and the compressor were sufficient for operation at 82.7 MPa (12,000 psi), studies revealed possible material incompatibility at that pressure and above. It was recommended that if a component should be replaced for 82.7 MPa (12,000 psi) operation the replacement should meet the final objectives of 172 MPa (25,000 psi). Recommended changes in the system include; use of Monel 400 for pressures above 82.7 MPa (12,000 psi), use of bellows to replace the seal in the impact tester, use of a sapphire window attached to a fiber optic for event sensing, and use of a three diaphragm compressor

Measurement of Parity Violation in the Early Universe using Gravitational-wave Detectors

A stochastic gravitational-wave background (SGWB) is expected to arise from the superposition of many independent and unresolved gravitational-wave signals, of either cosmological or astrophysical origin. Some cosmological models (characterized, for instance, by a pseudo-scalar inflaton, or by some modification of gravity) break parity, leading to a polarized SGWB. We present a new technique to measure this parity violation, which we then apply to the recent results from LIGO to produce the first upper limit on parity violation in the SGWB, assuming a generic power-law SGWB spectrum across the LIGO sensitive frequency region. We also estimate sensitivity to parity violation of the future generations of gravitational-wave detectors, both for a power-law spectrum and for a model of axion inflation. This technique offers a new way of differentiating between the cosmological and astrophysical sources of the isotropic SGWB, as astrophysical sources are not expected to produce a polarized SGWB.Comment: 5 pages, 2 figures, 1 tabl

Data Mining to Support Engineering Design Decision

The design and maintenance of an aero-engine generates a significant amount of documentation. When designing new engines, engineers must obtain knowledge gained from maintenance of existing engines to identify possible areas of concern. Firstly, this paper investigate the use of advanced business intelligence tenchniques to solve the problem of knowledge transfer from maintenance to design of aeroengines. Based on data availability and quality, various models were deployed. An association model was used to uncover hidden trends among parts involved in maintenance events. Classification techniques comprising of various algorithms was employed to determine severity of events. Causes of high severity events that lead to major financial loss was traced with the help of summarization techniques. Secondly this paper compares and evaluates the business intelligence approach to solve the problem of knowledge transfer with solutions available from the Semantic Web. The results obtained provide a compelling need to have data mining support on RDF/OWL-based warehoused data

Diploid Versus Tetraploid Annual Ryegrass Forage Yield Comparisons in Texas

Last updated: 6/20/201

Oat Forage Yields at Overton for 2004-2005 and Two-Year Means

Last updated: 6/9/200

Annual Ryegrass Forage Yields at Overton for 2000-200 I and Three-Year Means

Last updated: 6/12/200